> News > Industry News

Industry News

Comparison of cutting machine methods

1.plasma Cutting quality: excellent inclination Angle · Small area affected by heat, basically no slag, good to excellent fine cutting effect;

Application development of cutting machine

In the process of mechanical processing, plate cutting is commonly used in manual cutting, semi-automatic cutting machine cutting and CNC cutting machine cutting.

How to maintain the foam molding machine?

We all know that in order to keep our equipment up and running for longer, we must maintain it. In this way, it can not only reduce the failure rate of the equipment, but also prolong the service life of the equipment. Now let's take a look at how to maintain our foam molding machine.

How to maintain and maintain EPS Block Moulding Machine?

We must also check before and after the EPS Block Moulding Machine is used. It is necessary to determine whether the equipment can be used normally and whether there is any abnormal buzzing sound.

EPS is used as a building material

1.1 Lay EPS insulation layer to prevent roadbed freezing damage

Physical properties of EPS

Expanded Polystyrene foam (EPS) is a light polymer. It is the use of polystyrene resin adding foaming agent, heating at the same time for softening, gas generation, the formation of a rigid closed cell structure of foam plastic. The density of 1.1

<...3 4 5 6 7...9 >